MohnJadden
Member
-Hobbyking X550 frame and X550 landing gear/camera gimbal (Includes a servo)
-KK2.1 LCD FC board
-Hobbyking power distribution board
-Turnigy Multistar 20C ESCs
-Unknown manufacturer 900kv motors
-3 batteries, all 2200mah 11.1v 20C lipo - one is the type where it has a large black and red plug (Value Hobby brand) but may be kaput, two are Deans (Great Planes brand). I'll include a Deans to black/red plug so you can use the two batteries with the black/red plug already wired up
-Two basic 3S lipo chargers
-Esky 6ch 2.4ghz Tx with two Esky Rxes
-10x4.5 props with a set of spares
-USB programming interface for the FC board
It's ready to go as soon as you take it out of the box! I'm just kinda done with big quads - I have enough fun with my little Syma X1.
I'll have to take off the landing gear to fit it for shipping but it's easy to put back together. The original owner used zip-ties to secure it in place since it slides over the lower deck a bit. This is the way it's designed; there's a little bit of wiggle in the landing gear.
The Tx/Rx are already bound. The servo for the camera gimbal can be controlled with the top-right hand pot switch.
Have some photos; I can take more! (the clothesline photo is not from any issue, it just got tangled up a bit in another basement test flight. It has all new props.)
A video of the quad in action:
https://www.youtube.com/watch?v=RJ0FJpDAwaM&feature=youtu.be
Asking $260 shipped OBO for the whole setup.
I may be willing to part out the quad itself if the price is right.
Questions? Comments? Concerns? Hit me up, I'll do the best I can do answer!
-KK2.1 LCD FC board
-Hobbyking power distribution board
-Turnigy Multistar 20C ESCs
-Unknown manufacturer 900kv motors
-3 batteries, all 2200mah 11.1v 20C lipo - one is the type where it has a large black and red plug (Value Hobby brand) but may be kaput, two are Deans (Great Planes brand). I'll include a Deans to black/red plug so you can use the two batteries with the black/red plug already wired up
-Two basic 3S lipo chargers
-Esky 6ch 2.4ghz Tx with two Esky Rxes
-10x4.5 props with a set of spares
-USB programming interface for the FC board
It's ready to go as soon as you take it out of the box! I'm just kinda done with big quads - I have enough fun with my little Syma X1.
I'll have to take off the landing gear to fit it for shipping but it's easy to put back together. The original owner used zip-ties to secure it in place since it slides over the lower deck a bit. This is the way it's designed; there's a little bit of wiggle in the landing gear.
The Tx/Rx are already bound. The servo for the camera gimbal can be controlled with the top-right hand pot switch.
Have some photos; I can take more! (the clothesline photo is not from any issue, it just got tangled up a bit in another basement test flight. It has all new props.)
A video of the quad in action:
https://www.youtube.com/watch?v=RJ0FJpDAwaM&feature=youtu.be
Asking $260 shipped OBO for the whole setup.
I may be willing to part out the quad itself if the price is right.
Questions? Comments? Concerns? Hit me up, I'll do the best I can do answer!
Last edited by a moderator: