F
fengshuidrone
Guest
Have you downloaded the firmware for the FC yet? Here's links to that: First there is mission planner. This is a GUI and you need that to install your firmware on the FC: http://planner.ardupilot.com/wiki/common-install-mission-planner/well I got a good deal on the apm gps
This next link shows you how to upload the APM firmware onto the FC.
http://planner.ardupilot.com/wiki/common-loading-firmware-onto-pixhawk/
At the bottom of that page there is also a link to the APM forum.
After you get mission planner on your puter you connect the FC with a micro USB. Be gentle because the USB port will break off the board easily. Don't force it in. It will only go one way.
This link will help you out after you get things all up and working:
http://planner.ardupilot.com/wiki/common-advanced-configuration/
I know, I'm getting ahead. This is all stuff you can do when you're ready. You can go ahead and do it now too. It's gotta be done.
The page where I got all those links is here: http://planner.ardupilot.com/
Last edited: