What is Wrong with my Quad ???

AlienNet

Member
Hi all, i have just built a Tarot Iron Man 650, Streched to 750mm, Heres the Setup: X4 Tarot 4006 620kv Motors, x4 Turnigy Multistar 30a ESCs with latest SK sw: Naza M Lite, Spektrum ar8000 rx, all running on 14.8 v 4S, i have calibrated motors/escs individualy & with a Hub, did all calibs according to naza spec, The Quad flies great, with all functions working 100% eg: RTH IOC GPS HOLD ect: the problem is take off... once armed it will topple over, sometimes just 1 motor will start, BUT if i arm it and apply FULL throttle it will lift off quickly and as i said fly Brilliant, i cant get it to take off gently & smoothly like my other birds ?? i have also played around with gains, but no joy, any help or tips would be appreciated.
 

FlyGirl

Member
Hi all, i have just built a Tarot Iron Man 650, Streched to 750mm, Heres the Setup: X4 Tarot 4006 620kv Motors, x4 Turnigy Multistar 30a ESCs with latest SK sw: Naza M Lite, Spektrum ar8000 rx, all running on 14.8 v 4S, i have calibrated motors/escs individualy & with a Hub, did all calibs according to naza spec, The Quad flies great, with all functions working 100% eg: RTH IOC GPS HOLD ect: the problem is take off... once armed it will topple over, sometimes just 1 motor will start, BUT if i arm it and apply FULL throttle it will lift off quickly and as i said fly Brilliant, i cant get it to take off gently & smoothly like my other birds ?? i have also played around with gains, but no joy, any help or tips would be appreciated.

I think that is how you are supposed to take off as that is what mine does too. If I slowly increase the throttle it will wobble left, then right, each time with me correcting it or setting it back down until finally it goes up but like you, if I punch it, it jumps up nicely. Several months ago I got a NAZA M V2 which has a built in feature somewhat like a take off assist. It doesn't matter if you slowly move the throttle, the flight controller jumps it into the air just like we are doing on our Lites anyways. So slow and steady doesn't seem to be what is needed to lift off successfully or at least so I think....
 
Last edited by a moderator:

AlienNet

Member
Hi Lauren, Thanks for your reply, i got the problem solved, just hooked up to the Naza Assistant and turned the Motor idel speed to Max, now all motors start together and quad lifts off smoothly.
 

Top