Flydigital
Member
Nearly ready with settings but cannot properly set up the failsafe switch. I want to use the gear switch to act as forced failsafe mode. I have done this using PROG123 and assigning each mix1, mix2, mix3 to force the over ride of the 3 way switch.
Trouble is MIX3 is different to MIX1 and 2. It has 'tune' and a curve instead of 'uprate'
This means when over riding GPS it does;t work. It is not able to switch into failsafe. This is probably very confusing but may make sense to anyone who has gone through this procedure.
Alternatively there may be another method to set up the override switch.
Thanks for any help here!
Trouble is MIX3 is different to MIX1 and 2. It has 'tune' and a curve instead of 'uprate'
This means when over riding GPS it does;t work. It is not able to switch into failsafe. This is probably very confusing but may make sense to anyone who has gone through this procedure.
Alternatively there may be another method to set up the override switch.
Thanks for any help here!