trying to use ch 9-14 with 14sg

[cyborg]

I have futaba 14sg with r7008sb receiver. I also have naza m lite that does not work with the r7008sb in sbus mode. I bought frsky tfr8sb that work fine in sbus mode with the 14sg. I can't get the tfr8sb into mode B so I could use ch 9-14 with sbus.

I decide to use the r7008sb as the second receiver for ch 9-14. In the fastest mode the r7008sb connected as the second receiver on ch 9-14 but at the same time lost connection with the frsky tfr8sb because that was a fasst receiver.
I order another tfr8sb. If I replace the naza m lite with naza m v2 then the r7008sb will work with that receiver. That would be a expensive option.

I am going on vacation in 3 weeks and I wanted to take my hex. I also received my tarot 2d gimbal yesterday and it was missing the hard ware packet to assemble the gimbal. I have a camera switch, a multi switch for lights and I want to control the gimbal . This is why I need the other channels. Any advice would appreciated.

 

[PeteDee]

You can just use the 7008SB as a standard S-Bus Rx for channels 1-14 just set it as mode D, you can use 9-15 for whatever you want using a traditional connection.

I have mine set to mode A and control A-E-T-R, mode and IOC through S-Bus and pitch of my gimbal and camera switch via channel 5 and 8.

Pete

 

[cyborg]

R7008sb sbus don't work with naza m lite

 

[PeteDee]

You have the choice of S-Bus or S-Bus2, you must use S-Bus, who told you it will not work?

Pete

 

[cyborg]

You have the choice of S-Bus or S-Bus2, you must use S-Bus, who told you it will not work?

Pete

Firmware upgrade fix it for naza m v2 but not for naza m litehttp://www.multirotorforums.com/showthread.php?9661-R7008SB-S-Bus-with-NAZA/page2

 

[cyborg]

I was trying to link to a 6 pg thread in this forum. The thread explained it. This is why I'm using the tfr8sb receiver

 

[PeteDee]

Apologies my mistake here, appears the 7008 does not work with Lite. It does work fine with M though.

Pete

 

[PeteDee]

Time for an update for the Lite please DJI or are you too busy driving around in all your Spaghetti Veyrons?

 

[cyborg]

The second tfr8sb receiver I bought does not solve my problem. First I can't get either of the tfr8sb receiver to switch to mode B. Second the 14sg can do dual receiver only if using two fasstest receiver.

I was struggling with this issue for over two weeks so I decide to order a naza m v2. I will use the lite for a future build of a quad.