Hey, i have built a tricopter... DT 750 Motor + i86 Flight Controller + F20 A ESC + T9X Tx Rx ... my problem is everything going fine except the left boom motor
giving much thrust and lift before the right and tail boom .. in result the tricopter rolls towards right and BANG !!!
Things I have Done :
1. I have checked all wiring from Rx to Controller and Controller to Motors and Servo They are OK.
2. I have calibrated throttle range of each ESC saperately ( Just Rx and ESC with Motor, No controller)
3. I have stick centered the Controller.
4. I have Calibrated my Turnigy 9X Tx.
5. I have checked CoG, its ok..
I have told by a person that its may be ur Tx fault.. If its really is,.. how can i check this? i have calibrated my T9X Sticks..
I have upload a video of my Turnigy 9x Stick Display Menu video, Aileron display is showing some thing fishy.. tell me if its my Tx problem..
https://www.youtube.com/watch?v=vSsCitP9vzo
This is the video of my Tricopter Behaviour while throttling up !!
https://www.youtube.com/watch?v=I7FPvK0SBcU
please watch the video of this and help me out... Thanks
giving much thrust and lift before the right and tail boom .. in result the tricopter rolls towards right and BANG !!!
Things I have Done :
1. I have checked all wiring from Rx to Controller and Controller to Motors and Servo They are OK.
2. I have calibrated throttle range of each ESC saperately ( Just Rx and ESC with Motor, No controller)
3. I have stick centered the Controller.
4. I have Calibrated my Turnigy 9X Tx.
5. I have checked CoG, its ok..
I have told by a person that its may be ur Tx fault.. If its really is,.. how can i check this? i have calibrated my T9X Sticks..
I have upload a video of my Turnigy 9x Stick Display Menu video, Aileron display is showing some thing fishy.. tell me if its my Tx problem..
https://www.youtube.com/watch?v=vSsCitP9vzo
This is the video of my Tricopter Behaviour while throttling up !!
https://www.youtube.com/watch?v=I7FPvK0SBcU
please watch the video of this and help me out... Thanks