slave1-98
New Member
View attachment 24552
View attachment 24553
View attachment 24554
my slave 1 build.
thorax hexacopter frame kit 300mm
6- afro slim escs 20a opto
6- turnigy multistar elite 2206-2300kv motors
gemfam 5x3 props
turnigy tgy i6 tx and rx
castel BEC unit. 10a max made in Kansas city.
multistar break out cable
running on a 11.1 2750mah 35c lipo. getting around 9 min flight times. 175 gram battery. I also have two 11.1 4000mah 40-80c high discharge rate lipos. its not as nimble with these packs but it has unbelievable thrust and punch with them. flight times with the bigger packs are around 13-14 min
cc3d flight control board-stock pid settings. flies great
no fpv gear yet.
this is my first multirotor. my first time being on this forum. or any forum at that. any comments or feedback is much appreciated. been building this and tuning it since January. its been really fun. and it flys so good. its sooooooo fast. I hope to get better at tuning PID so I can open it up more and make it even more nimble and fast.
thanks!View attachment 24546 View attachment 24547 View attachment 24548 View attachment 24549 View attachment 24550 View attachment 24551
thorax hexacopter frame kit 300mm
6- afro slim escs 20a opto
6- turnigy multistar elite 2206-2300kv motors
gemfam 5x3 props
turnigy tgy i6 tx and rx
castel BEC unit. 10a max made in Kansas city.
multistar break out cable
running on a 11.1 2750mah 35c lipo. getting around 9 min flight times. 175 gram battery. I also have two 11.1 4000mah 40-80c high discharge rate lipos. its not as nimble with these packs but it has unbelievable thrust and punch with them. flight times with the bigger packs are around 13-14 min
cc3d flight control board-stock pid settings. flies great
no fpv gear yet.
this is my first multirotor. my first time being on this forum. or any forum at that. any comments or feedback is much appreciated. been building this and tuning it since January. its been really fun. and it flys so good. its sooooooo fast. I hope to get better at tuning PID so I can open it up more and make it even more nimble and fast.
thanks!View attachment 24546 View attachment 24547 View attachment 24548 View attachment 24549 View attachment 24550 View attachment 24551
Attachments
-
11070923_1569203706677172_3842466611262045864_n.jpg105.7 KB · Views: 361 -
11115606_1572227883041421_8079864394103549296_n.jpg153.6 KB · Views: 357 -
1459164_1558897251041151_3691791153910619249_n.jpg50.2 KB · Views: 711 -
11149321_1575951999335676_4798807010254520396_n.jpg90.5 KB · Views: 844 -
11178277_1573758686221674_817410616452468246_n.jpg100.8 KB · Views: 991 -
11066612_1566669270289152_3556611613199026673_n.jpg46.6 KB · Views: 856 -
10519530_1557391377858405_7517564389277328661_n.jpg61.9 KB · Views: 865 -
10995555_1557391347858408_4784415885216743221_n.jpg114.8 KB · Views: 895 -
11058414_1557391327858410_6855785131939630043_n.jpg97.7 KB · Views: 840
Last edited by a moderator: