Father Francis Hawkins
Who said FPV was a fairly new activity.
Recently while flying my 188 quad I had a semi rough landing, I dropped it in from about 3 feet onto the walkway. Upon checking everything over and attempting to spin it up, I notice one motor wouldn't spin. It required 6A esc's and I had a spare. It was not the same name brand and other than knowing the amp rating I am unclear. I connected said motor to the three other esc's and it spun up perfectly. ( This is how I also came to the conclusion it was esc related). I soldered in the new esc to the FDB and hooked up the leads to the motor. I ran everything back through the vehicle setup wizard in LibrePilot and also did another Tx setup. Now all motors start up at the same time, but the motor in question revs up slower than the other three. (In other words, it like a turbine warming up before I can lift off. Once flying, is fine). Until I land and have to re-arm. There is no apparent physical damage to this motor. What, if any could be the issue?
Thank you in advance....
Thank you in advance....