TH9X w/er9x and the Naza

[aWanderer]

Hello all,

I'm in the process of finishing up this F450 build. I have the TH9X flashed with er9x. Is anyone else using this radio with their quad and a Naza?
If so, could you please share your radio setup with me? I have no idea what I am doing - lol

~Thanks

 

[aWanderer]

It's ok, I got it all working and setup. Maiden was awesome except I had to reverse the aileron. After that, rock solid. Very happy with the Naza.

 

[aWanderer]

Well, actually, I did get it working and have flown a few times. I tried manual mode, but it's to sensitive. Does anyone know how to setup dual rates. I have the gear switch changing from Attitude mode to Manual mode, but need the dual rates setup so it's not so sensitive.

 

[zuby]

I was having the exact same problem setting up my er9x tx with a cc fc. here is what worked for me.
This was posted by Thomas B (different forum) on how to program the 3 position switch to channel 5.
+++++++++

By the way,
If you want to use all three pos of your 3 pos switch, you should setup channel 5 like this:

CH5 100% MAX ID1
+100% FULL ID2
You can set the [+] setting by moving the marker one point deeper than CH5 (a line below the CH5 will appear) after that[Menu long]*
and you can enter the config for ID2

 

[aWanderer]

Nice. Thank you very much. What were you using all three positions for?