TBS Discovery RTF

lag1791

Member
This multirotor has been flown about five times for tuning purposes. Note, this motor\prop setup is designed for 4s voltage.

Parts: Quadcopter
TBS Disco Frame
TBS 900kv motors & esc’s
Upgraded left hand threaded motor shaft/nut for two motors (so nut will not loosen up) will also include the 2 standard ones as spares
Naza Lt FC w/GPS
Red DJI Arms x4
9x5 APC MR props
Battery Straps
XT60 Connector for battery hookup (other styles available upon request)

FPV
RMRC TVL-700 camera
ImmersionRC 600ma VTx (brand new) 5.8ghz video band.


Frysky DJT 2.4ghz combo, includes Frysky DJT JR module w/telemetry and a V8FR-II Rx. I will do a custom antenna shrink wrap with a V at top.
All paired and mounted to a Turnigy 9XR.

Radio Turnigy 9XR – Brand new, will include small 1600mha 3s Lipo for power. The radio is fully programmed to use all Naza modes including failsafe. I will include documentation to provide you information for what each switch does. This quad is also fine-tuned by me and will be locked in, perfectly stable in all modes and will fly stable and smooth. All you need to do is put in a charged battery (3300-4500mah 4s) and fly. I usually get 10min out of my RMRC 3300 4s and 12-13min with my nanotech 4000 mah.

Asking $_950.00 usd Plus shipping and/or PayPal fees (2.9%)
Please feel free to PM me to discuss any questions you might have.


Sent from my Nexus 7 using Tapatalk
 

lag1791

Member
Pics

Sent from my Nexus 7 using Tapatalk
 

Attachments

  • uploadfromtaptalk1388957754329.jpg
    uploadfromtaptalk1388957754329.jpg
    149.3 KB · Views: 224
  • uploadfromtaptalk1388957765675.jpg
    uploadfromtaptalk1388957765675.jpg
    149 KB · Views: 274
  • uploadfromtaptalk1388957777730.jpg
    uploadfromtaptalk1388957777730.jpg
    150.1 KB · Views: 302
  • uploadfromtaptalk1388957789798.jpg
    uploadfromtaptalk1388957789798.jpg
    149.6 KB · Views: 298
  • uploadfromtaptalk1388957800959.jpg
    uploadfromtaptalk1388957800959.jpg
    152.7 KB · Views: 296
  • uploadfromtaptalk1388957864998.jpg
    uploadfromtaptalk1388957864998.jpg
    155.3 KB · Views: 247
  • uploadfromtaptalk1388957878165.jpg
    uploadfromtaptalk1388957878165.jpg
    145.2 KB · Views: 248
  • uploadfromtaptalk1388957889745.jpg
    uploadfromtaptalk1388957889745.jpg
    152.5 KB · Views: 281
Last edited by a moderator:

lag1791

Member
Build pics

Sent from my Nexus 7 using Tapatalk
 

Attachments

  • uploadfromtaptalk1388958123419.jpg
    uploadfromtaptalk1388958123419.jpg
    144.2 KB · Views: 257
  • uploadfromtaptalk1388958141140.jpg
    uploadfromtaptalk1388958141140.jpg
    143 KB · Views: 249

binlagin

Member
Such a nice quad... i'm very tempted but I'm still a little green to FPV and Quads to be flying this model just yet.

Maybe in a couple more weeks once I get some more time playing on my Mini-H quad. Good luck with the sale!
 

Johannes2118

New Member
Hi, so as I understand this unit is complete with video down streaming and one can see where it is flying? Any idea what the shipping charge is to Sydney Australia post code 2118 NSW. What does 4s voltage mean? Sorry as you may have noticed varly new at this stuff but never to old to learn. Regards, Johannes from Down-Under Australia.
 

lag1791

Member
Hi, so as I understand this unit is complete with video down streaming and one can see where it is flying? Any idea what the shipping charge is to Sydney Australia post code 2118 NSW. What does 4s voltage mean? Sorry as you may have noticed varly new at this stuff but never to old to learn. Regards, Johannes from Down-Under Australia.


Yes this is a complete FPV setup which means it transmits video to you.
There are 3 more things you will need.
1. Battery. I recommend 4000mah 4s lipo. 4s is how many cell there are.

2. Immersion 5.8ghz video receiver to receive the video signal. Either the immersionRC uno or duo will work with the frequencies that the 600mw transmitter puts out.

3. Video goggles or LCD to see the video.


Sent from my Nexus 7 using Tapatalk
 



Top