Selling this Octo for a friend. It is all built and ready for you to tune to fly. I have it boxed up currently ready to ship. The box is huge but at least you take it out of the box and plug in batteries and fly!
This entire setup is brand new, it has only had a single test flight. At that point he realized it was more than he was prepared for so it is going up for sale. I tried to sell this last year but he decided against it. Now we just want to give it a new home.
Here is the equipment:
-Droidworx AD8 HLE
-MK2.1 / NAVI 2.0 / GPS 2.1 with GPS shield 1.1 (photos are with older navi and compass board, it was upgraded)
-New SmartOSD (not installed)
-New MK Plug-N-Play XBees
-AXI 2814-22 motors
-MK 2.0 BL ESCs in Octo distribution board (i2c isolator so you still fly if one esc fails)
-AV200 Photohigher Camera mount
-2x Multiplex LN-6015 chargers
-5.8GHZ 600 mw transmitter/receiver for copter camera (not installed)
-1.2GHZ 1watt transmitter/receiver for camera feed
-Graupner MX-20 with all the accessories ($900 alone)
-Graupner lipo upgrade
-Graupner protection bag
-Graupner neck strap
-Contest S-Pult Carbon fiber MX-20 transmitter tray
Copter is setup with giant 8mm bullets - FYI if you need to order a new connector for your style of batteries.
The photos below show the original build with the older Navi and GPS boards, they were upgraded to 2.0 equipment and have been setup and bench run but not flown!
This copter is fully built and in a specially designed crate. It will come to you FULLY BUILT and ready to plug in. 0 build time here!! The crate is large and will have to go UPS Freight or some equivalent. Pickup is in Ohio if you don't want to pay for shipping.
Price:
-Copter and battery chargers: $1680
-Graupner MX-20 Radio and all radio accy: $510
-Photohigher AV200: $350
-FPV equipment: $150
Take the copter and AV200 mount for $1990 + shipping or pick it up!
Or take it all for $2550 + shipping. It's boxed and ready to ship!
Thanks!
This entire setup is brand new, it has only had a single test flight. At that point he realized it was more than he was prepared for so it is going up for sale. I tried to sell this last year but he decided against it. Now we just want to give it a new home.
Here is the equipment:
-Droidworx AD8 HLE
-MK2.1 / NAVI 2.0 / GPS 2.1 with GPS shield 1.1 (photos are with older navi and compass board, it was upgraded)
-New SmartOSD (not installed)
-New MK Plug-N-Play XBees
-AXI 2814-22 motors
-MK 2.0 BL ESCs in Octo distribution board (i2c isolator so you still fly if one esc fails)
-AV200 Photohigher Camera mount
-2x Multiplex LN-6015 chargers
-5.8GHZ 600 mw transmitter/receiver for copter camera (not installed)
-1.2GHZ 1watt transmitter/receiver for camera feed
-Graupner MX-20 with all the accessories ($900 alone)
-Graupner lipo upgrade
-Graupner protection bag
-Graupner neck strap
-Contest S-Pult Carbon fiber MX-20 transmitter tray
Copter is setup with giant 8mm bullets - FYI if you need to order a new connector for your style of batteries.
The photos below show the original build with the older Navi and GPS boards, they were upgraded to 2.0 equipment and have been setup and bench run but not flown!
This copter is fully built and in a specially designed crate. It will come to you FULLY BUILT and ready to plug in. 0 build time here!! The crate is large and will have to go UPS Freight or some equivalent. Pickup is in Ohio if you don't want to pay for shipping.
Price:
-Copter and battery chargers: $1680
-Graupner MX-20 Radio and all radio accy: $510
-Photohigher AV200: $350
-FPV equipment: $150
Take the copter and AV200 mount for $1990 + shipping or pick it up!
Or take it all for $2550 + shipping. It's boxed and ready to ship!
Thanks!
Attachments
Last edited by a moderator:
