Hi guys.
I got in last Friday my long-awaited S800. Since June 29 I'm waiting due to the replacement of the ESC's and wookong MC.
During the weekend I set up everything and calibrated all the settings and this afternoon I went to my first test flight.
When s800 went off I notice that not all engines also ran in three pairs of which made me immediately suspicious that something was not right. I gave him a bit more throttle and s800 when going off was not going straight, he leaned to the side and I have not pursued further because if he falls would broke some propellers and these are very hard to find.
At home I grabbed the machine and I was shooting film to try for the film in slow motion to detect what are the engines that ran with a difference. When I was filming some engines started making strange noises and get fast rotations.
In the video problems begin the minute 0:07 m
I've disassembled the S800 to see if the MC is the new one and in my multimeter readings I get 1.350 in all M's and F's, but happens a strange thing, when it's measuring the read start at 1.350 but the number keep counting (1.351 1.352 1.353.......) and it never stop.
Last night i sent this same videos to DJI and they contact my dealer. Here is the response from DJI to my dealer:
Quote:
Someone can help a little bit?
Thanks
I got in last Friday my long-awaited S800. Since June 29 I'm waiting due to the replacement of the ESC's and wookong MC.
During the weekend I set up everything and calibrated all the settings and this afternoon I went to my first test flight.
When s800 went off I notice that not all engines also ran in three pairs of which made me immediately suspicious that something was not right. I gave him a bit more throttle and s800 when going off was not going straight, he leaned to the side and I have not pursued further because if he falls would broke some propellers and these are very hard to find.
| S800 Tests 001 (2 min 9 sec) |
At home I grabbed the machine and I was shooting film to try for the film in slow motion to detect what are the engines that ran with a difference. When I was filming some engines started making strange noises and get fast rotations.
| S800 Tests 002 (0 min 37 sec) |
In the video problems begin the minute 0:07 m
I've disassembled the S800 to see if the MC is the new one and in my multimeter readings I get 1.350 in all M's and F's, but happens a strange thing, when it's measuring the read start at 1.350 but the number keep counting (1.351 1.352 1.353.......) and it never stop.
Last night i sent this same videos to DJI and they contact my dealer. Here is the response from DJI to my dealer:
Quote:
| Hi, Anselm, Could you help Mr. Flavio? The motor sounds not right. GPS orientation is wrong and S800 heading is not clear. Best regards, DJI Innovations Tel: 0086-755-2665-6677 http://www.dji-innovations.com |
Someone can help a little bit?
Thanks
