Hello,
Ive been flying a quad with a gopro for quite some time now and want to move up to the next level with a hexacopter that has the ability of lifting a good camera such as a mini dslr for some high quality AP work.
It would be hugely appreciated if someone could look over my shopping list to make sure its all ok before I hit the button!
Also some suggestions on appropriate lipos would be good too. Looking for around 10+ mins.
Going to get "TVS-2 two channel tiny video switch" to change between cameras.
Hope Ive covered everything.. Ideally Im aiming to buy as many parts from the same place as possible to keep things simple.
HKPilot Mega 2.7 flight controller
6x Afro 30amp esc
6x Turnigy Multistar 3508-640Kv motors
APC style propellers 13x6.5
Mobius Action cam
UBlox Neo 7m GPS
Hobbyking 650X6 frame
Boscam 5.8Ghz 200mv fpv combo
5N Storm eye Brushless gimbal with controller and 2x brushless motors
A camera the size of a Nex 5
Batteries
And all the other small bits and pieces required
Thanks in advance
Ive been flying a quad with a gopro for quite some time now and want to move up to the next level with a hexacopter that has the ability of lifting a good camera such as a mini dslr for some high quality AP work.
It would be hugely appreciated if someone could look over my shopping list to make sure its all ok before I hit the button!
Also some suggestions on appropriate lipos would be good too. Looking for around 10+ mins.
Going to get "TVS-2 two channel tiny video switch" to change between cameras.
Hope Ive covered everything.. Ideally Im aiming to buy as many parts from the same place as possible to keep things simple.
HKPilot Mega 2.7 flight controller
6x Afro 30amp esc
6x Turnigy Multistar 3508-640Kv motors
APC style propellers 13x6.5
Mobius Action cam
UBlox Neo 7m GPS
Hobbyking 650X6 frame
Boscam 5.8Ghz 200mv fpv combo
5N Storm eye Brushless gimbal with controller and 2x brushless motors
A camera the size of a Nex 5
Batteries
And all the other small bits and pieces required
Thanks in advance