Hello all. I'm new to this forum and multi-rotors in general. I have a f450 with the E300 power system and Naza V2. It has been flying great with the stock setup. I decided to try some carbon props. I purchased the Maytech carbons with the self tightening nut that were the same length and pitch as the stock DJI props. I come from a 3D hell background and thought the stiffer carbon props would improve performance, but they are making the 450 fly like crap. Climb outs are really weak, they are loud, motors are coming down hotter than with the stock props, vertical descents are almost scary b/c it wobbles so much. It acts like all the gains need to be tweaked in every axis etc.
I'm guessing these props are out of balance, but I haven't figured out a good way to balance the props with the self tightening nuts yet. Before I start chasing gains, or just give up on these props I wanted to chime in and see if anyone else is running these with success or has any pointers on where to start with tuning this setup.
Thanks,
Matt
I'm guessing these props are out of balance, but I haven't figured out a good way to balance the props with the self tightening nuts yet. Before I start chasing gains, or just give up on these props I wanted to chime in and see if anyone else is running these with success or has any pointers on where to start with tuning this setup.
Thanks,
Matt