Power Management & Distribution

E

erayymz

Member
Heya folks,

I am building my first multirotor, and so far, this site is amazing helping me out. That being said, as I started to receive the parts I ordered, I may have a problem to deal with.

Here is a list of parts that will be on the aircraft:
  1. NAZA-M V2 | MC: 4.8V-5.5V, VU: 7.4V-26V (Recommended 2s - 6s lipo)
  2. 3-Axis Gimbal Storm 32 | 9-15V (Recommended 3s - 4s lipo)
  3. Immersion RC 600mw 5.8Ghz A/V Transmitter | 6-25V (Recommended 2s - 6s lipo)
  4. FrySky DF 2.4Ghz RX | 3.5-10V
  5. Sony CCD FPV Cam | 12V
  6. 2CH Electronic AV Switcher | 12V
Now, I am going to be using a 4S 14.8 V 6000mAh 35c battery. That being said, the first three items on the list will perfectly work with this battery. However, the last three items require a bit low voltage. Looks like for the item #4, I need a 2S battery and items #5 and #6 I need a 3S battery. Instead, I am planning on getting two switching regulator (this one), one for the part #4 and set it to 10V, and other for the parts #5 and #6 and set it to 12V. Will that work?

Thanks,
 


You must log in or register to reply here.
Top