Hoverfly No Tilt Stabilization or control after flashing to 4.6

[Cloud Level Media]

Howdy boys!

Just getting around to updating a few of the ships in the fleet.

I just updated a larger quad I have with a Gaui Crane III gimbal on it.
I use the HFP FC to stabilize this gimbal.

With 4.3 the gimbal is tuned nicely.
With 4.6 the roll is the same but the tilt is unresponsive.

I reflashed with 4.3 and the gimbal works once again tilt and roll.
Reflashed to 4.6 and again roll works but no tilt.

Anyone else seeing this?

Any advice?

Cheers
Huck

 

[S11D336B]

Huck,
Can you confirm that the tilt slider moves in the setup client with your radio's control?
Thanks,
George

Howdy boys!

Just getting around to updating a few of the ships in the fleet.

I just updated a larger quad I have with a Gaui Crane III gimbal on it.
I use the HFP FC to stabilize this gimbal.

With 4.3 the gimbal is tuned nicely.
With 4.6 the roll is the same but the tilt is unresponsive.

I reflashed with 4.3 and the gimbal works once again tilt and roll.
Reflashed to 4.6 and again roll works but no tilt.

Anyone else seeing this?

Any advice?

Cheers
Huck

 

[Stacky]

Im having a similar sort of problem. While doing the gimbal calibration on the HFP Im finding my roll compensation slider stops functioning and only the center point adjustment works. The slider does move on my tilt control though.

 

[Cloud Level Media]

Thanks George. I will check tomorrow.