Newbie to Multi rotor and would like some advice please

[anthvxne]

Hi All,

I know you probably get this all the time and would appreciate your help.

Im looking to build my first quad and have pulled up a list below. Really need advice on if it should work okay, my TX and RX thoughts and anything else I might need

Hi All,

Im new to this but been looking around for guides, help etc.

I have pulled a list together of components that I would like to use for my quad. I am really after advice on if these are good enough (and will they work together okay).

I have a Spektrum DX7SE transmitter and I am not sure on Receiver compatabilty so would appreciate any guidance.

Frame
Hobbyking X666 Glass Fiber Quadcopter Frame 666mm
http://www.hobbyking.co.uk/hobbykin...ber_Quadcopter_Frame_666mm_UK_Warehouse_.html

Motors
NTM Prop Drive Series 28-26 1100kv / 252w
http://www.hobbyking.co.uk/hobbykin...e_Series_28_26_1100kv_252w_UK_Warehouse_.html

Electronic Speed Control
Afro Slim 20Amp Multi-rotor Motor Speed Controller (SimonK Firmware)
http://www.hobbyking.co.uk/hobbykin...Controller_SimonK_Firmware_UK_Warehouse_.html

Flight Control Board
Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
http://www.hobbyking.co.uk/hobbykin...th_6050MPU_And_Atmel_644PA_UK_Warehouse_.html

DX7se Receiver
- unsure?

Propellers
8x4.5 SF Props 4pc R/H Rotation (White)
http://www.hobbyking.co.uk/hobbykin...ops_4pc_R_H_Rotation_White_UK_Warehouse_.html

Battery
Turnigy nano-tech 2650mah 3S 25~50C Lipo Pack
http://www.hobbyking.co.uk/hobbykin...650mah_3S_25_50C_Lipo_Pack_UK_Warehouse_.html

Charger
IMAX B6-AC Charger/Discharger 1-6 Cells
http://www.hobbyking.co.uk/hobbykin...Cells_GENUINE_with_UK_plug_UK_Warehouse_.html

Is this all I would need or do I need to add anything else to the list


Thanks in advance

Anth

 

[anthvxne]

hi,

is anyone able to assist me in this?

Thanks

 

[MadAtTheSky]

Looks good, I personally have had trouble with the Turnigy NTM motors. They ran super hot!! I would get lower kv motors like their 800kv motors for that size frame and go with 10-11 inch props.

 

[anthvxne]

hi, thanks for your reply. ill have a look into that.

you ever had much experience with Spektrum DX7se?

seems the are only compatible with certain Receivers the AR's but they are old now. however are DSMX compatible?

http://www.hobbyking.com/hobbyking/...X_DSMX_Compatible_8Ch_2_4Ghz_TwinPort_Rx.html

 

[MadAtTheSky]

I don't have experience with that radio, I am currently using a Turnigy 9xr Pro.. I love it's expandability and telemetry options