Need help with Dji 5.8ghz videolink

ShRadwan

New Member
Hi

I m totally new to FPV , so i purchase the DJI 5.8ghz video link to start with :nevreness: , but i have some difficulty to get any image out of my CCD camera .
the camera with 3 out wires ( red , white and black ) i know that white is for video signal , the problem is the video link input is 3.5mm jack so i purchase 3.5 to 3.5 converter to link them ,
but when i tried to wire the 3.5mm jack to my camera as white wire is video signal in the middle ring and the ground in the bottom ring , red is 12v. in the tip , i didn't got any image ,
so can any one please help me in this , what i am doing wrong in this wiring :nevreness:View attachment 9535 View attachment 9536

sorry for the long question
 

Attachments

  • photo.jpg
    photo.jpg
    145 KB · Views: 667
  • photo1.jpg
    photo1.jpg
    145.7 KB · Views: 465


ShRadwan

New Member
thanks for the replay
yes its 12v camera , i would like to solder the wires direct but i don't know witch one i should put for video signal and power
 

JeffY

Member
White - video signal
Black - ground
Red - +Ve

You can test the red and black with a voltmeter, should give about 12v depending on your battery pack.
 

Top