Need help to find a good motors for my cc h6 650

[Teco]

HI GUYS,?

I have a CC h6 650, with Avroto Motors, A friend mine start building a DJI 550, so to help this guy out i sold my 6 Motors to him, to be install in his dji 650, now i got no motor, hahah

On my CC OCTO 1000 i have T-Motors, love the power and very quite, so i'd like to put T-Motors on my hex a too,, Noticed that is a lot of Options out there,
Can some one help with this set up?

I was looking on the website and found a lot of T-MOTORS,,, MS SERIES, MS, MT, U SERIES,,

I will use instal the motors on,

CC G6 650
DJI 30A esc,
Graupner E- Prop
12"X6
and 4S batteries,
also i have a tarot gimbal and Gopro 3.

thanks

 

[araines2750]

Teco,
Some of our fliers have switched to MN-3510 - 700 kva with 4 S on our HC-650.
What is you weight?
12" x 6" is a fairly aggressive prop.....
Depending on the weight.... up to about 4300 grams we recommend 12x4 t-motor CF's on the MN3510-700 kva. Longer motor life & fair less reactive to gusts.
As you get over 4300 grams, the options get slim.... We are currently bench testing the MN3510-630 kva with 12x4 t-motor CF with 5S....this has not been tested by T-Motor, so we are conducting independent tests.
Andrew

 

[Thalios]

Hello Teco,

Love my DYS BE4108-10 580Kv. Super powerful.

If you want 800Kv, the 2814-09 are awesome. For the price, there is no equal.

 

[johnthorn]

Go onto T Motors site and run the "recommended solution" and it will give you 2 or three motor solutions good luck

 

[Teco]

Owwww, thanks, I will do that