NerV-Runna
Member
Hey everyone!
Im having an issues with my hexa, its a Y config.
Eg. When hovering, (in both ATTI and GPS mode) I give some rudder to yaw. The copter yaws say 45 degrees, but when i release the rudder, it returns to its original direction.
To rotate it and keep it rotated, i find I have to hold the rudder stick. If I yaw more than 90 degrees, it keeps that position and doesnt slowly yaw back.
Its almost like the yawing resolution is set to increments of 25-30 degrees.
Any ideas?
Copter info
----------
AUW 4kgs
2x 5000mah 4S 45C
Motor to motor distance 70cm
Tiger 2814 motors
APC 11x4.7 SF
Gains are
Basic: 160
Atti: 120
Yaw: 130
Vertical: 200
Thanks
NR
Im having an issues with my hexa, its a Y config.
Eg. When hovering, (in both ATTI and GPS mode) I give some rudder to yaw. The copter yaws say 45 degrees, but when i release the rudder, it returns to its original direction.
To rotate it and keep it rotated, i find I have to hold the rudder stick. If I yaw more than 90 degrees, it keeps that position and doesnt slowly yaw back.
Its almost like the yawing resolution is set to increments of 25-30 degrees.
Any ideas?
Copter info
----------
AUW 4kgs
2x 5000mah 4S 45C
Motor to motor distance 70cm
Tiger 2814 motors
APC 11x4.7 SF
Gains are
Basic: 160
Atti: 120
Yaw: 130
Vertical: 200
Thanks
NR
Last edited by a moderator: