NAZA-M V2 - LED Flashes 2 Quick Green then Satellite

[questech]

Hello Everyone,

I'm running an Octocopter using the NAZA-M V2 (just building it now and testing).

On my initial motor and general shake out test everything worked great with one oddity.

First of all, I was in an area with bad satellite reception (indoors) so I assume that I will be getting 3 red flashes indicating that I have less than 5 satellites captured... no problem.

But what is weird is that instead of getting a green LED followed by the 3 red LEDs, I'm getting 2 very quick green LEDs (in GPS Mode - in ATTI Mode I get 2 very quick yellow LEDs) followed by the 3 red LEDs.

In manual mode I just get the 3 red LEDs.

The closest thing that I could gather from the DJI information is that one or more of the sticks might not be centered... but that's not the case. My sticks are centered and I verified the fact in the assistant software (as well as recallibrating several times).

Does anyone know what this could mean??

Thank you in advance for your support!!

Anthony

 

[questech]

OK Guys, I figured it out, and I'll post the answer here in case anyone else is interested.

This LED behavior IS a result of a non-centered stick... but it's the throttle, which is supposed to be in the low position. Once I bring the throttle to center position (before starting the motors) the green LED only flashes once.

This is normal... right??

Thanks!