milansteadicam
New Member
Hello,
Can you please help me with some technical question about NAZA-M V2 control.
I have Octocopter Ironman 1000 from Tarot company ( build my self) and I use
Naza-M V2 control unit. Aircraft setup to Octo- rotor I.
Motor Specifications: Kv: 530rpm/v ,Resistance: 0.075Rm ,Idle Current: 0.5A ,Can size: 45mm ,Can Length: 14mm ,Shaft: 3.17mm ,Suggested ESC: 30A ,Weight: 115g (with wire and connector) ,Rated Watts : 150W,
ESC Specification:Output: Continuous 40A, Burst 55A up to 10 seconds. Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NiMh battery.
BEC: FlyFun-40A: 3A / 5V switching mode BEC.FlyFun-40A-OPTO: None.
1.4 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm
for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
Size: FlyFun-40A: 60mm*24mm*15mm. FlyFun-40A-OPTO:
60mm*28mm*12mm.. Weight: FlyFun-40A: 38.8g. FlyFun-40A-OPTO: 35.2g.
I using the iOSD Mini with BTU module, and 15x5.5 Carbon Fiber Propeller.
when I do motor test on BTU or PC all motors work except motor 2 & 4
they don’t spin. Same when I arm. all motors spin except this two motors. they
start spin when I increase throttle joystick to about middle.
I was change motors and I was change ESC. Still same. I was try plug motor
2& 4 to different motor connector on control unit (any connector motor 1,3,5,6,7,8,)
and ESC & motor work well except not when is plug to motor 2&4 on main control unit. can you help and to tell me if this is normal or I have faulty main control unit on motor 2&4 connectors?
maybe do something wrong and I don't know. any idea what else I should try?
thank you guys
Brisbane AUS
Can you please help me with some technical question about NAZA-M V2 control.
I have Octocopter Ironman 1000 from Tarot company ( build my self) and I use
Naza-M V2 control unit. Aircraft setup to Octo- rotor I.
Motor Specifications: Kv: 530rpm/v ,Resistance: 0.075Rm ,Idle Current: 0.5A ,Can size: 45mm ,Can Length: 14mm ,Shaft: 3.17mm ,Suggested ESC: 30A ,Weight: 115g (with wire and connector) ,Rated Watts : 150W,
ESC Specification:Output: Continuous 40A, Burst 55A up to 10 seconds. Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NiMh battery.
BEC: FlyFun-40A: 3A / 5V switching mode BEC.FlyFun-40A-OPTO: None.
1.4 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm
for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
Size: FlyFun-40A: 60mm*24mm*15mm. FlyFun-40A-OPTO:
60mm*28mm*12mm.. Weight: FlyFun-40A: 38.8g. FlyFun-40A-OPTO: 35.2g.
I using the iOSD Mini with BTU module, and 15x5.5 Carbon Fiber Propeller.
when I do motor test on BTU or PC all motors work except motor 2 & 4
they don’t spin. Same when I arm. all motors spin except this two motors. they
start spin when I increase throttle joystick to about middle.
I was change motors and I was change ESC. Still same. I was try plug motor
2& 4 to different motor connector on control unit (any connector motor 1,3,5,6,7,8,)
and ESC & motor work well except not when is plug to motor 2&4 on main control unit. can you help and to tell me if this is normal or I have faulty main control unit on motor 2&4 connectors?
maybe do something wrong and I don't know. any idea what else I should try?
thank you guys
Brisbane AUS