I recently purchased an DJI F550 frame wheel kit with the naza m lite and gps unit. Upon setting everything up all all motors spin in correct direction and props are on correct motors. However when I go to lift off 3 motors overpower the others causing the copter to spin. I can control the direction it spins though. Ive looked for hours trying to find answers but no luck. Im stumped and very frustrated please help.
Setup:
DJI F550
Naza m lite w/gps
stock motors and esc 30A
Dx7s
2100 mAh 3s 20C lipo
Setup:
DJI F550
Naza m lite w/gps
stock motors and esc 30A
Dx7s
2100 mAh 3s 20C lipo