Mystery cloud 60A ESC for WKM ?

fritz99

Member
Hello !

Has anyone alread tried to use the Mystery cloud 60A ESC for WKM ?
They run with 500 Hz PPM and I want to use them for my redesign of my crashed HEXA.

Thank you for your anwers.

Fritz
 

Topper

Member
Hi Fritz,

can you explain why you think you need 60A per ESC on a HEXA? I think those will be way oversized unless you have real heavy load goal.


Rgds Topper
 

fritz99

Member
Hi Fritz,

can you explain why you think you need 60A per ESC on a HEXA? I think those will be way oversized unless you have real heavy load goal.


Rgds Topper

Because it is the smallest ESC from this company that can handle 5S or 6S LIPOS

Fritz
 

Topper

Member
Harrier-Suprem(MT) V2 Series (Maytech) are working perfekt with WKM and NAZA and those start from 40A upwards with 6S support.

Rgds Topper
 


Topper

Member
building a Hexa with WKM and save 20 bucks per ESC by using a 60A pseudo 500 Hz ESC with more weight will not give you the result of a stabile and relyable MR. Thats my 2 cents.
 

fritz99

Member
building a Hexa with WKM and save 20 bucks per ESC by using a 60A pseudo 500 Hz ESC with more weight will not give you the result of a stabile and relyable MR. Thats my 2 cents.

Did you already try them because you have such bad results ?
 

Topper

Member
Mystery Clond have a very basic firmware and less option to programm them. I hade some Mystery 30A with DOA, one start burning in flight. For a low budget funflyer maybe, for a relyable AP/AV Multirotor I whould not even think about using them. In general they will work as an ESC with a WKM (depending on FW revision) same issue with sone of the Turnigy Plush. Some series working some will not start the engine.
 



Top