I did all of the calibrations to the pixhawk and tx. I also calibrated the esc's all at on time. On the motor test the motors will beep but not start up. And the pixhawk accepted each calibration. On the motor test it gives me window that say "Denied by auto pilot"
Finally got the motors to spin up and run correctly. Now my problem is when I pull the throttle all the way down the motors do not shut off they just decrease in speed.
Finally got the motors to spin up and run correctly. Now my problem is when I pull the throttle all the way down the motors do not shut off they just decrease in speed.
Last edited by a moderator: