Motor esc pairing help

[ryanroberts1983]

Just bought a carbon core 950 and picking motors and esc. Wondering if this is a good pairing for a 6s 35c setup.

http://hobbyking.com/hobbyking/stor..._4830_480Kv_22Pole_Multi_Rotor_Outrunner.html
http://hobbyking.com/hobbyking/store/__2165__TURNIGY_Plush_40amp_Speed_Controller.html

im worried the output amperage on the esc is too high for the motors

 

[smrceo]

It doesnt work that way..the esc will only provide the current the motor needs. The prop/motor determines current. If you run to small of an esc and the motor/prop will actually overload esc and it will fail. It is always good to have overhead in your esc. those should work together fine.