Mix on DX18 Retracts to Fail Safe Switch help please..

Zaidy

Member
Hi Guys

I am trying to add a mix on a DX 18, so when the Fail Safe switch is engaged the retracts will drop down and when the switch is disengaged they will go back up.

So far I have managed it once but the retracts stop working either in the fully down or up position and the only way to get them back working is by resetting the mix!!
Obviously I am doing something wrong :upset:

Currently if the TX is turned off, all goes into fail safe, throttle at 50% and retracts drop down, so I am happy there as all working as it should. But I do not want to turn the TX off every time just to go into Fail Safe !

Retract Channel on AUX4
Fail Safe on Gear Channel.

Thanks for your time.
 


Top