Med/Heavy Lift Quad Specs

[Racerx1962]

I'm building a quad to lift a Sony NEX and eventually a Pana GH4. Here are the specs:

• Tarot T1000 frame configured as X4 Quad
• SuperX FC
• Dualsky 7010 MR 330kv motors
• Dualsky 60A ESCs
• Dualsky 20X6 wood props
• GHT gimbal w/ Photobotic controller
• Dual 6S 8000mah lipos

I know it's a bit overkill for lifting a NEX, but I'm hoping for 15 to 20 minute flights. Is there anything out of whack with these specs?

 

[SleepyC]

Personally I'd avoid the Duelsky motors, fem what I have seen they are not good. The bearings are not tight straight from the factory.
Try Avroto, T-Motor or KDE.

 

[R_Lefebvre]

Or iPower. In my experience they also make excellent motors for a mid-range price.

 

[fltundra]

SuperX with the KDE motors and their 55amp esc's would be a sweet combination. You will loose a bit of efficiency using wood over CF props.

 

[Racerx1962]

I was given the Dualskys, so I'm gonna try them and monitor them closely.

 

[Racerx1962]

Are you referring to the MT4114s? With a 1000mm quad, would you suggest the 320kv with 17" props?