manual mode

[ollie10]

I hope that someone can help , got no hair left I am trying to setup a a manual mode switch to setup gps . no luck dx6i what switch do i use and how can i get it

 

[Zaidy]

I hope that someone can help , got no hair left I am trying to setup a a manual mode switch to setup gps . no luck dx6i what switch do i use and how can i get it

ideally you need a three position switch for manual/Atti/GPS. But you can get away with a two position by setting up Atti and GPS only. All your settings are done via the travel adjust on your TX in the Gear Channel.

Good luck

 

[TheUFGadget]

Well the NAZA assistant and endpoint adjustments will be your friend here. Hook it up to the computer and when you flick the switch you have assigned (channel 5 or "U") then you can move the endpoint spot until it shows GPS in the blue. Hope this helps. If not record your screen and post a youtube video. We can help from there!