Is my DJI Naza controller the right way?

[harry2509]

Is my controller the right way, so that the copter wont flip when I do the first flight?

http://i.imgur.com/cs7zo.jpg

The red arms are the front of the multirotor

Help appreciated

Harry :nevreness:

 

[Chalagi]

Turn the naza 90 degree to the left and make sure its center on the plate.

 

[harry2509]

Turn the naza 90 degree to the left and make sure its center on the plate.

Thanks, its good I have found out before I did the first test flight and it flips resulting in broken props!

 

[glacier51]

Harry:

My newbie advice to you is to review the manual, starting at page one. Mounting the NAZA with correct flight orientation is as basic as it comes.

Another suggestion is to head on over to rcgroups|multi-rotor helis and search on "NAZA" and "NAZA GPS". There's a wealth of knowledge there about DJI F450/550 construction, NAZA setup, Assistant programming tips, etc.

Good luck,
Ron

 

[tstrike]

Ron, maybe a recommend to the OP to look around HERE first before you spam, plenty and I mean plenty of info on the naza here at multirotorforums. Harry, you might also look at moving your vu to a back arm and in a position you can see the led from the ground.

 

[mailman35]

i gotta agree RTFM is a critical skill before spamming forums with simple crap. this site has been swamped by noobing for most of the second half of this year.