LinuxDrone Project Howto get output from bmp180 module? (branch voha/fwsdk)

D

Dacobi

Member
Hello All

I'm new to the LinuxDrone code.
I've made a BBB Cape with a MPU6000, a BMP180 and a MAG3110FCR1 (juvultech.com)

I've successfully cross compiled and install the voha/fwsdk branch on the 3.8.13xenomai-bone31 image

when i run /usr/local/linuxdrone/bin/linuxdrone I get this output:root@arm:/usr/local/linuxdrone/bin# ./linuxdrone
path to modules: /usr/local/linuxdrone/modules
/usr/local/linuxdrone/modules/gy87
/usr/local/linuxdrone/modules/gy87/libgy87.so
/usr/local/linuxdrone/modules/hmc5883
/usr/local/linuxdrone/modules/hmc5883/libhmc5883.so
/usr/local/linuxdrone/modules/pwmoutput
/usr/local/linuxdrone/modules/pwmoutput/libpwmoutput.so
/usr/local/linuxdrone/modules/pwminput
/usr/local/linuxdrone/modules/pwminput/libpwminput.so
/usr/local/linuxdrone/modules/ms5611
/usr/local/linuxdrone/modules/ms5611/libms5611.so
/usr/local/linuxdrone/modules/bmp180
/usr/local/linuxdrone/modules/bmp180/libbmp180.so
/usr/local/linuxdrone/modules/simpletransform
/usr/local/linuxdrone/modules/simpletransform/libsimpletransform.so
Bmp180
GY-87
Hmc5883
Ms5611
PwmInput
PwmOutput
SimpleTransform

And then nothing more.

How do I test that the connection to bmp180 is working?

i2cdetect -r 1 shows that it is there at address 0x77

Thanks!
/Jacob
 


You must log in or register to reply here.
Top