Conor Knoxx
New Member
Not even started... already in trouble! To summarize: I have a Turnigy Evolution transmitter, and just purchased a Vifly 150 drone, with a FRsky receiver. Turns out they won't talk to each other. So I want remove the FRsky, and install the receiver that came with Turnigy radio (TGY-iA6C). I was hoping this would be a simple "match the same color wires and bind it up.." heh.. not so much.
On the drone, there's a yellow / red / black wires connected to the receiver. I don't see any labeling on what each is connected to. On the iA6C there's a 4-pin connector (ppm / s.bus / vcc / gnd) as well as plug for B-det with +/-
Maybe this won't even work? (and I need to order a micro FlySky receiver?)
Advice to keep the noob from melting his new stuff is most appreciated!!
Cheers,
Conor
On the drone, there's a yellow / red / black wires connected to the receiver. I don't see any labeling on what each is connected to. On the iA6C there's a 4-pin connector (ppm / s.bus / vcc / gnd) as well as plug for B-det with +/-
Maybe this won't even work? (and I need to order a micro FlySky receiver?)
Advice to keep the noob from melting his new stuff is most appreciated!!
Cheers,
Conor