How do I know if....

[adanac]

My F450 is connected to the Naza Assistant Software? The LED stops flashing when connected to the computer and my TX is on, but there appears to be no relationship between computer and F450 beyond that. Help!

 

[Bartman]

arnold, i brought that F450 home tonight. $275 for an F450 with NAZA/GPS ver1, maybe a good deal, maybe not but it was a guy in my club and he wanted to get rid of it.

the point is, i'm probably going to keep it so i'll be better versed on the inner workings of the 'naz in the coming days/weeks.

by the way, the wesd51 soldering iron is the way to go.

 

[FlyGirl]

My F450 is connected to the Naza Assistant Software? The LED stops flashing when connected to the computer and my TX is on, but there appears to be no relationship between computer and F450 beyond that. Help!

You should get a solid green light on the LED when successfully connected to the PC. More than likely the driver is not installed or installed correctly. You must do it in this order....

• STEP1: Please download assistant software and driver from DJI website. Then decompress.
• STEP2: Connect MC and PC via USB cable, power on MC.
• STEP3: If operating system tries to install driver automatically, cancel it.
• STEP4: Open folder DJI_USB_Driver, follow the Driver Installation Manual strictly to finish installation.

 

[adanac]

Right on, thank you. It seems like a decent deal. Thank you for the advice on the soldering iron.

 

[adanac]

Thank you, Flygirl. I'll try again!

You should get a solid green light on the LED when successfully connected to the PC. More than likely the driver is not installed or installed correctly. You must do it in this order....

• STEP1: Please download assistant software and driver from DJI website. Then decompress.
• STEP2: Connect MC and PC via USB cable, power on MC.
• STEP3: If operating system tries to install driver automatically, cancel it.
• STEP4: Open folder DJI_USB_Driver, follow the Driver Installation Manual strictly to finish installation.