Hi.
I am Rune, from Norway. 33 years old. Computer engineer student
Health went bad, and then back to school.
Reading about multi-rotors for since I started watching flighttest 1-2 years ago. Just started with my two first kits.
Love the hobby, and the flying just as much as the builds. Know some, but not enough
I have a youtube page as well, as many others. Where I will be posting whatever
In my Hangar:
quadcotper nr 1, foto setup
Turnigy Talon carbon v2 frame with extended boms.
Multistar 22 pole 4108-380kv.
NAZA M flight controler
Multistar 45 amp ESC's.
1555 carbon props.
4s 5000mAh singel or parallel setup with batteries.
Fatshark attitude FPV. 600 TVL cam.
2 axes gimbal for gopro black
19 min flight time on one pack of batteries. Have no time on the parallel yet
weight with single battery setup is 2598 gr. Batteries are 550 gr with the cabels
Gains NAZA M default all 100. Working fine, but would like to tune since it shakes a little when I descend fast
Quadcopter 2. Learning and for fun flight
X580 frame heavily modified. Landing gear cutted in half. and motor mounting straight on booms (shacking quad issue caused by to big motors.)
AX 4008q-620kv Motors
Hobby King 50 amp ESC's
NAZA M controller right now/ waiting for a KK2.1
1147 carbon props
4S 5000mah Battery single setup. not set yet. But 13 min with 15.1v left.
weight 1550 gr ready for flight.
GoPro 3 Black mounted solid for FPV
Gains are 140.140.130.140.50.50 Having some problem setting them, so this will change. It seems to be to hi/low on roll only, and I find that strange. But roll is acting like craze when I turn up attitude gains. Will find a answer in the forum
Have a Turnigy 9x with no plans to do anything with(only battery). It works like a charm.
I am Rune, from Norway. 33 years old. Computer engineer student
Reading about multi-rotors for since I started watching flighttest 1-2 years ago. Just started with my two first kits.
Love the hobby, and the flying just as much as the builds. Know some, but not enough
I have a youtube page as well, as many others. Where I will be posting whatever
In my Hangar:
quadcotper nr 1, foto setup
Turnigy Talon carbon v2 frame with extended boms.
Multistar 22 pole 4108-380kv.
NAZA M flight controler
Multistar 45 amp ESC's.
1555 carbon props.
4s 5000mAh singel or parallel setup with batteries.
Fatshark attitude FPV. 600 TVL cam.
2 axes gimbal for gopro black
19 min flight time on one pack of batteries. Have no time on the parallel yet
weight with single battery setup is 2598 gr. Batteries are 550 gr with the cabels
Gains NAZA M default all 100. Working fine, but would like to tune since it shakes a little when I descend fast
Quadcopter 2. Learning and for fun flight
X580 frame heavily modified. Landing gear cutted in half. and motor mounting straight on booms (shacking quad issue caused by to big motors.)
AX 4008q-620kv Motors
Hobby King 50 amp ESC's
NAZA M controller right now/ waiting for a KK2.1
1147 carbon props
4S 5000mah Battery single setup. not set yet. But 13 min with 15.1v left.
weight 1550 gr ready for flight.
GoPro 3 Black mounted solid for FPV
Gains are 140.140.130.140.50.50 Having some problem setting them, so this will change. It seems to be to hi/low on roll only, and I find that strange. But roll is acting like craze when I turn up attitude gains. Will find a answer in the forum
Have a Turnigy 9x with no plans to do anything with(only battery). It works like a charm.