Mikrokopter Hexa ALt Hold strange behavior!help me!

vrpilot

New Member
hi Guys ,I'm new here and I decided to ask your help for a problem that makes me sleep :(

I recorded a little video and you can hear well the strange behavior of the motors when the ALTH is activated. ALT sensor is Ok no damage!
the problem is not 'the maintenance of the position as you can see in the video seems ok. the problem can understand listening to the 'sound of the video..to maintain the correct altitude, the fc corrects continuously as you can hear in my movie.

http://www.youtube.com/watch?v=P6-Jc5Yn1Go&feature=relmfu

My Hexa continuous acceleration and deceleration when active AH!What could be the problem?i dont know ! many PID change ,min gas change but the problem is the same !

Another strange thing I saw during the recording of the altimeter and the graphic slider that swings up and down 'all the time, could have a meaning or is his normal behavior?

http://www.youtube.com/watch?v=NLnZMxkt36k




My Hexa :
Flight-Ctrl V2.1 ME
NaviCtrl V1.1
MKGPS Version 1.0
mkmag
6x pairs E-Prop Graupner 10x5
6x Roxxy 2827-35
firm 0.88

Thank you in advance for reply
 


Bartman

Welcome to MultiRotorForums.com!!
i'm not sure what your problem is? i don't really hear anything odd in the video and it looks like it's holding alt ok, no?

altitude hold is something of a misnomer. when the MK senses it's above the altitude it reduces throttle but as it goes below the set altitude it goes back onto the throttle stick so if the stick is set too high it will accelerate back up and go through the set altitude again. as a result, you have to set the throttle stick to just above what it needs for a hover so it can get itself back up to the set altitude if it goes below it.

confusing, yes, but did any of that make any sense?
 




Top