GPS modes with DX6i?

[R|M|D Photography]

I have my disco and just threw a GPS on my Naza unit. I have it setup where I can get it in GPS, atti and failsafe modes by mixing the gear and flap switches. Is it possible to mix some of the other non used switches to control the GPS modes?? All I am after is to turn IOC on and off. Please if you can help me with the settings I would greatly appreciate it!

 

[djneils98]

i posted the settings i used in reply to you on another thread:

i have the IOC features running on the elev and flap switches in combination.
flap at 0 means IOC off and 1 turns it on
the elec switch controls which mode (CL or HL) is operational if IOC is on

in the trav adjust for flap up I have 85% and flap down 104%
in subtrim the flap is set to +17
in flaps i have flaps norm down 90 and flaps land up 85 with both elev values 0
in mix 2 i have:
flap> flap act
rate d 0% U-105%
sw ele D/R trim act

i got this working sort of by accident after playing around with the settings after getting most things working from a tutorial

edit - notice you're using the flap switch to control gps/atti/failsafe - i use the gear and mix to control those leaving flaps free
i don't really know what a lot of those settings actually do (!)
if you can't get it working i'll record a vid of each of the setting displays on the dx6i and post that for you

edit - just noticed you say you're using the flaps switch for atti/gps/fs - I use the gear + mix to control those...