I have numerous questions (I've just ordered my GPS) so I cant test it in practice ...
Things like:
• At what point does the module recognise a position to be “Home”? If it’s at cold start time, would I have to wait a certain period of time before trying to set a new “home”, can you imagine it remembering a position then you drive down the road and it goes back to where you’ve just been?
• If its in “altitude hold” mode and I cut the throttle will it override the hold, similarly for giving it more throttle
• If is in “GPS hold” mode, firstly does that include the directional facing of the X650 and secondly, can I override the GPS hold, if so, will it automatically return to the position established as the holding position automatically?
• What exactly is “Care free” mode? I believe it might be a heading lock; can it be combined with the “GPS hold” mode?
• Can a heading lock be combined with the “Return Home” mode, so as to maybe get a side facing sweeping camera shot as it returns home.
• Finally, when “Returning home” can I use the throttle? Just in case there is an obstacle in the way for instance, will it still follow the path home?
___________________________________________
I also mailed Mark Whalley at www.sportsmoto.co.uk and he was very helpful , so if anyone has the same questions : here's his answers
After you turn on the GPS switch you then start the props on the X650 and fly to say 20 ft height (safe away from you and ground) 15 secs after the props started the GPS is logging its go home point. if you then fly away and let go of the sticks 2 secs duration the GPS (as long as its found sats) will attempt potion hold. If you then click the 3 position switch to 3rd position then the X650 will go home to last waypoint it set after rotor start.
If you turn off the GPS in flight then turn on again the 15 sec position go home starts again and so on...
For altitude hold you must hover the X650 as you would normally at a fixed throttle position and then put on altitude hold switch. it will then work its own height within a band set in the software altering itself autonomously
If you cut the throttle it will die and crash, after you re take any of the sticks you override the GPS and Altitude hold
Not sure on heading hold question I suspect not
In return home i found i didn't need to touch it with altitude on, if altitude off then of course yes use throttle
Things like:
• At what point does the module recognise a position to be “Home”? If it’s at cold start time, would I have to wait a certain period of time before trying to set a new “home”, can you imagine it remembering a position then you drive down the road and it goes back to where you’ve just been?
• If its in “altitude hold” mode and I cut the throttle will it override the hold, similarly for giving it more throttle
• If is in “GPS hold” mode, firstly does that include the directional facing of the X650 and secondly, can I override the GPS hold, if so, will it automatically return to the position established as the holding position automatically?
• What exactly is “Care free” mode? I believe it might be a heading lock; can it be combined with the “GPS hold” mode?
• Can a heading lock be combined with the “Return Home” mode, so as to maybe get a side facing sweeping camera shot as it returns home.
• Finally, when “Returning home” can I use the throttle? Just in case there is an obstacle in the way for instance, will it still follow the path home?
___________________________________________
I also mailed Mark Whalley at www.sportsmoto.co.uk and he was very helpful , so if anyone has the same questions : here's his answers
After you turn on the GPS switch you then start the props on the X650 and fly to say 20 ft height (safe away from you and ground) 15 secs after the props started the GPS is logging its go home point. if you then fly away and let go of the sticks 2 secs duration the GPS (as long as its found sats) will attempt potion hold. If you then click the 3 position switch to 3rd position then the X650 will go home to last waypoint it set after rotor start.
If you turn off the GPS in flight then turn on again the 15 sec position go home starts again and so on...
For altitude hold you must hover the X650 as you would normally at a fixed throttle position and then put on altitude hold switch. it will then work its own height within a band set in the software altering itself autonomously
If you cut the throttle it will die and crash, after you re take any of the sticks you override the GPS and Altitude hold
Not sure on heading hold question I suspect not
In return home i found i didn't need to touch it with altitude on, if altitude off then of course yes use throttle