Ray Hollida
New Member
Frame = Flame Wheel 450
Motors = NTM Prop drive 28-30S800kv/300w
Props = 10 x 4.5 with nylock prop nuts
ESC = Turnigy Multistar 2-4S
Flight controller = Naza M Lite
GPS = Naza
Transmitter and receiver = Turnigy 9X
History = 1 hour of flight time.
Spare parts
3 extra motors, new
2 extra landing gear, new
Turnigy ESC programming card
The transmitter is configured for Acro, Mode 2. I can provide Turnigy switch assignments, gain settings and mix settings. The transmitter is programmed for GPS, Attitude, Manual and Failsafe modes.
$595.00 with spare parts, without FPV.
You can add GAUI GV-100 color monitor, receiver, transmitter with a Boscam Explorer HD+ 1080P color camera for $499.
Contact me at [email protected].
View attachment 25101
Motors = NTM Prop drive 28-30S800kv/300w
Props = 10 x 4.5 with nylock prop nuts
ESC = Turnigy Multistar 2-4S
Flight controller = Naza M Lite
GPS = Naza
Transmitter and receiver = Turnigy 9X
History = 1 hour of flight time.
Spare parts
3 extra motors, new
2 extra landing gear, new
Turnigy ESC programming card
The transmitter is configured for Acro, Mode 2. I can provide Turnigy switch assignments, gain settings and mix settings. The transmitter is programmed for GPS, Attitude, Manual and Failsafe modes.
$595.00 with spare parts, without FPV.
You can add GAUI GV-100 color monitor, receiver, transmitter with a Boscam Explorer HD+ 1080P color camera for $499.
Contact me at [email protected].
View attachment 25101
Attachments
Last edited by a moderator: