espinelmedia
Member
Frame : Droidworx AD6HLE
Flight controller : FULL STACK - Flight Controller V2.1
• Navi-Ctrl V2,0 for navigational GPS flight
• MK GPS v2,1
Engines : MK3638 ( Kopter will come with extra 5 brand new MK3638 engines we always kept as spares but never had a problem...one of the new engines has bullet connectors on it...never mounted )
Aluminum Heat sinks for ESC's placed on top and bottom all soldering professionally done
6 12x3.8 Slow fly props 14inch props will fit as well they give plenty of lift when flying heavier cams like 7D. Will also include the 14inch slow fly props.
all props already balanced.
LED's for night time flying (blue and red).
If you are using a spektrum receiver I will keep the satellite on for you, all you would have to do is bind and you are ready to go. Parameters for low voltage are set to 13.8 LED's will begin to blink and buzzer will go off
droidworx crash cage.
Very clean set up, all existing engines have new prop adapters. New engines also come with more prop adapters.
Good position hold and altitude hold.
Mikrokopter boards loaded with new firmware, sale will also come with MKUSB
all green lights in kopter tools.
What do you need? - transmitter/lipo battery/landing gear. My landing gear on this was the av200 and it also carried my Lipos.
Shipping CONUS only.
Selling because 4 kopters is too many!!! my girlfriend hates that I spend so much time with them...women....they will never understand.
pm if any questions ....about the kopter...not the girlfriend....u sneaky weasels.
thanks for looking.
Flight controller : FULL STACK - Flight Controller V2.1
• Navi-Ctrl V2,0 for navigational GPS flight
• MK GPS v2,1
Engines : MK3638 ( Kopter will come with extra 5 brand new MK3638 engines we always kept as spares but never had a problem...one of the new engines has bullet connectors on it...never mounted )
Aluminum Heat sinks for ESC's placed on top and bottom all soldering professionally done
6 12x3.8 Slow fly props 14inch props will fit as well they give plenty of lift when flying heavier cams like 7D. Will also include the 14inch slow fly props.
all props already balanced.
LED's for night time flying (blue and red).
If you are using a spektrum receiver I will keep the satellite on for you, all you would have to do is bind and you are ready to go. Parameters for low voltage are set to 13.8 LED's will begin to blink and buzzer will go off
droidworx crash cage.
Very clean set up, all existing engines have new prop adapters. New engines also come with more prop adapters.
Good position hold and altitude hold.
Mikrokopter boards loaded with new firmware, sale will also come with MKUSB
all green lights in kopter tools.
What do you need? - transmitter/lipo battery/landing gear. My landing gear on this was the av200 and it also carried my Lipos.
Shipping CONUS only.
Selling because 4 kopters is too many!!! my girlfriend hates that I spend so much time with them...women....they will never understand.
pm if any questions ....about the kopter...not the girlfriend....u sneaky weasels.
thanks for looking.
