pattersonimages
Member
Droidworx ad8hle / ys-x6 / av200 - $3800 vancouver bc canada / area -
Purchased from Cryhavoc38 last summer (Everything was originally purchased/built brand new in May 2012) Have changed over a few small things. Currently starting a "bigger" project and having to sell off a few of my birds. (6 is too many right?) If your near Vancouver you can come see it in action / test.
This setup can be sold with the standard landing gear / av200 combo - or the av200 w/360 kit. Price will change depending!
Its currently setup with Futuba SBUS receiver that I can leave on so its a bind/fly for you if your a Futuba user.
This is what you get:
YS-X6 flight controller - w/ waypoints. - as well as a small base station / wireless router setup.
PHOTOHIGHER AV200 Gimbal
Droidworx AD8 HLE (Heavy Lifter, Extended Landing Gear) - or 360/kit / av200 can be discussed.
http://www.aerialtechnology.com/shop...lift-extended/
8 Avroto 2814-11s
http://www.uavrotorking.com/avroto-m2814-11s
8 Hobbywing 40amp Platinum Pro esc's
http://www.hobbypartz.com/07e-c-platinum-40a.html
The frame has two additional AD8 Heavy lifter plates installed. Extra plates to allow for a cleaner installation with more levels to hold the electronics and cables.
http://www.aerialtechnology.com/shop/center-plate-8-for-ad-series-heavy-lift/
Customized multiwiicopter Voltair power distribution board with two battery leads. This has been enhanced for the power draw by using heavy guage wire to connect the pos to pos leads and the neg to neg leads.
8 APC 12x3.8 SF props
Turnigy 3/5amp 5/6v ubec for the gimbal servo power.
LED LIGHTING KIT INSTALLED for night flying.
IF you are out of the country and wish to purchase this, I will ship internationally, but you will have to cover the cost of a FEDEX custom box/packing job and full shipping costs. You would also be responsible for any VAT/Import taxes.
I will have to partially disassemble the airframe for shipping.
Not down to every nut and bolt, but enough to fit into a decent sized box and be well protect
$3800.00 obo - make me an offer!
Photos to come...
Purchased from Cryhavoc38 last summer (Everything was originally purchased/built brand new in May 2012) Have changed over a few small things. Currently starting a "bigger" project and having to sell off a few of my birds. (6 is too many right?) If your near Vancouver you can come see it in action / test.
This setup can be sold with the standard landing gear / av200 combo - or the av200 w/360 kit. Price will change depending!
Its currently setup with Futuba SBUS receiver that I can leave on so its a bind/fly for you if your a Futuba user.
This is what you get:
YS-X6 flight controller - w/ waypoints. - as well as a small base station / wireless router setup.
PHOTOHIGHER AV200 Gimbal
Droidworx AD8 HLE (Heavy Lifter, Extended Landing Gear) - or 360/kit / av200 can be discussed.
http://www.aerialtechnology.com/shop...lift-extended/
8 Avroto 2814-11s
http://www.uavrotorking.com/avroto-m2814-11s
8 Hobbywing 40amp Platinum Pro esc's
http://www.hobbypartz.com/07e-c-platinum-40a.html
The frame has two additional AD8 Heavy lifter plates installed. Extra plates to allow for a cleaner installation with more levels to hold the electronics and cables.
http://www.aerialtechnology.com/shop/center-plate-8-for-ad-series-heavy-lift/
Customized multiwiicopter Voltair power distribution board with two battery leads. This has been enhanced for the power draw by using heavy guage wire to connect the pos to pos leads and the neg to neg leads.
8 APC 12x3.8 SF props
Turnigy 3/5amp 5/6v ubec for the gimbal servo power.
LED LIGHTING KIT INSTALLED for night flying.
IF you are out of the country and wish to purchase this, I will ship internationally, but you will have to cover the cost of a FEDEX custom box/packing job and full shipping costs. You would also be responsible for any VAT/Import taxes.
I will have to partially disassemble the airframe for shipping.
Not down to every nut and bolt, but enough to fit into a decent sized box and be well protect
$3800.00 obo - make me an offer!
Photos to come...
Attachments
Last edited by a moderator: