Does Naza Lite support X8 configuration?

StuR

Member
Apologies if this has been asked before, but I can't find any clear answer to this? Any help would be appreciated. Cheers.
 

StuR

Member
I ask because i've no experience of the X8 configuration, but im considering converting my F450 to X8 using my Naza lite. As far as i can see the Lite does not support X8, but the fella in this thread has done it http://www.rcgroups.com/forums/showthread.php?t=1675974&page=3 What confuses me though (not hard to do) is the way he shows his prop rotation. Both the top & bottom motors are rotating the same way, for each arm?? I understood that the motor/prop below ran counter clockwise to the one above. Or is this not necessarily the case? Cheers.
 

flitelab

Member
Lite doesn't officially support octo or x8. The work around is to use quad mode and a Y harness to two escs. Ths is why the motors on each are turn the same way instead of opposite like on the naza v2.
 

StuR

Member
Thank you Flitelab for your response. Thats sort of what i was thinking from the images, but i was not very sure. So when the motors on each arm rotating the same way is this as effective (stability in wind) as when the motors rotate counter clockwise?
 


Top