DJI NAZA M V1 USB not working

[fritz99]

Hello !

I have a big problem :

My NAZA is working ok and flying is also ok.
The LED shows the status ok.

But when I connect the USB connector the led stops showing the status and gets green with very low light.
I cannot get a connection to the PC.
This happens since yesterday.
Befor that I could plug in the USB connector, the led kept showing the status an I coud connect to the pc.

Can anybody help me ?

Fritz

 

[TAPPEDOUT]

Are you using a hub with a low power USB port?

 

[fritz99]

No, direct connected to the usb connector of the pc.
And the Naza LIPO is also connected when that happens.

 

[ChrisViperM]

Just try to use different USB-cables....and different USB PC-ports, even a different PC if possible. I have thrown "hundreds" of faulty USB cables in the trash can....if that all doesn't help, you got a problem with the NAZA

#

Chris

 

[TAPPEDOUT]

Is correct USB driver installed? Windows 8 uses different driver from DJI than other versions.

 

[yakjock]

Just try to use different USB-cables....and different USB PC-ports, even a different PC if possible. I have thrown "hundreds" of faulty USB cables in the trash can....if that all doesn't help, you got a problem with the NAZA

#

Chris

+1 for this I have had this same problem with one of my Naza's & it turned out to be the USB cable, try all of the connection options.