DJI 450F with Gymbal how many channels??

[soulrider911]

Hi guys im new here, so hope this is the right place to be posting this. I am ordering a DJI F450 with NAVA M Lite and GPS. I also am putting led lights and a gymbal on it as well. SO here is my question. I want to be able to control the gimbal tilt from my TX as well as turning the LED's on and off. I assume i need 2 spare channels for this. I have a spektrum DX7s, and was wondering if that will do it or do i need to get the 8 channel?? thanks so much!!

 

[Jareth_Atian]

You'll need at least nine channels. Seven for the Naza-Lite and one each for your planned additions.

The Naza-Lite requires 7: Aeleron, Elevator, Throttle, Rudder, X1, X2, and U. X2 is used to control the Intelligent Orientation Control and U is used to change from GPS to Manual (or Attitude) mode. X1 is often set to a knob so that you can adjust gains while the craft is flying.

 

[soulrider911]

Great that makes sense thanks so much for the reply bud!

 

[demith Paul]

remote control planes can still stabilize and control the GoPro camera precisely with the highest stability. The precision of control angle is within therangeof , so picture or video output can reach the best quality.