Different ESC in Hexacopter - HELP

Reginak

Member
Hi,

One of my BP60A ESC burned some time ago and I couldn't find it here in my country so I asked here at RCgroups if I could replace this ESC with a Turnigy Plush 60A.

So I have 5 BP60A and 1 Turnigy Plush 60 on my hexa. And something is not right, the motoros with BP60A (2820/14 AXI) starts later and slower than the Turnigy one, the turnigy one starts earliear and rotating much faster. I tried some configs but no luck... can someone help me with the config?

Turnigy Plush manual - http://www.svensktmodellflyg.se/user...Sentry_ESC.pdf

BP60A ESC manual
http://www.bphobbies.com/pdf/bp/BP-60A-ESC.pdf

Is there anything I can do? I know using a differente ESC is not ideal, but I think right now its not even possible to have a good flight this way...

Thanks
 

Kari

Member
Hi

Have you calibrated throttle range for all esc:s? I wouldn't use different brand esc:s anyway with their own factory firmwares, there might be big difference even if they might look very much same esc.

Kari
 

Top