For sale fully assembled and ready to fly X8, including everything you need for professional videography (except camera).
Setup and what is included:
-Kopterworx KW10 motors
-Kopterworx KW60E ESC'S
-Gryphon power distribution board with dual BEC
-DJI WooKong flight controler
-DJI iOSD mini
-15'' XOAR propellers
-4 Gens Ace 5.8Ah 6S 45c lipo-s
-Spektrum DX8
-Spektrum DX6i (for camera operator)
-7'' LCD with built in diversity receiver and battery (comes with cloverleaf and patch antenna)
-3 axis Brushless Gimbal with 32bit Basecam controller
-400mW 5.8GHz transmitter
-500mW 5.8GHz transmitter
-Lipo 4s 2.65Ah for gimbal
-Lipo 3s 500mAh for video transmitter
-HDMI to AV converter
-Retracts
-iCharger 4010DUO
With all this I will give another 3axis Photohigher AV200 gimbal with Picloc3x and custom landing gear that can be used on this bird.
Only thing that needs to be replaced is WKM IMU with newer V2 IMU. But the bird flyes perfectly with current one.
I had more than 50 flights with it in all sorts of weather conditions and never had a single problem.
Using Canon 7D and 2 5.8Ah 6s lipos helicopter weighs cca. 11 kilograms it gets 8 min. of flight time (3.7v per battery cell and i never used lipos below that voltage)
No matter how hot the outside temperature is, after flying motors and ESC's stay lukewarm.
Helicopter is 100% reliable and wont let you down.
Price: 10.000€
View attachment 23968 View attachment 23969 View attachment 23970 View attachment 23968
Setup and what is included:
-Kopterworx KW10 motors
-Kopterworx KW60E ESC'S
-Gryphon power distribution board with dual BEC
-DJI WooKong flight controler
-DJI iOSD mini
-15'' XOAR propellers
-4 Gens Ace 5.8Ah 6S 45c lipo-s
-Spektrum DX8
-Spektrum DX6i (for camera operator)
-7'' LCD with built in diversity receiver and battery (comes with cloverleaf and patch antenna)
-3 axis Brushless Gimbal with 32bit Basecam controller
-400mW 5.8GHz transmitter
-500mW 5.8GHz transmitter
-Lipo 4s 2.65Ah for gimbal
-Lipo 3s 500mAh for video transmitter
-HDMI to AV converter
-Retracts
-iCharger 4010DUO
With all this I will give another 3axis Photohigher AV200 gimbal with Picloc3x and custom landing gear that can be used on this bird.
Only thing that needs to be replaced is WKM IMU with newer V2 IMU. But the bird flyes perfectly with current one.
I had more than 50 flights with it in all sorts of weather conditions and never had a single problem.
Using Canon 7D and 2 5.8Ah 6s lipos helicopter weighs cca. 11 kilograms it gets 8 min. of flight time (3.7v per battery cell and i never used lipos below that voltage)
No matter how hot the outside temperature is, after flying motors and ESC's stay lukewarm.
Helicopter is 100% reliable and wont let you down.
Price: 10.000€
View attachment 23968 View attachment 23969 View attachment 23970 View attachment 23968