pebsmebler
New Member
I'm selling my custom built Hexacopter ready to fly complete with back up parts and cases. The only items not included are the 2nd TX/RX for gimbal control and the accompanying LCD monitor and base station. Everything is in fantastic condition and has spent most of its time in the comfort of Pelican Cases. The frame is a custom carbon fiber 6 rotor frame similar to a Cinestar 6. Rock solid with very little vibration and flies extremely well. I have it wired so that the flight controller and motors are powered by a 4S LiPo (1 or 2) and everything else is powered by a separate smaller 3S LiPo. I normally flew a Sony NEX7 with APC Slow Fly 14x4.7 props with fantastic results. There is plenty of power to lift a Canon 5D with the proper prop/batt combo.
I'm asking $5000 which I feel is a steal for everything included! I would love to see it go to happy home and not have to part it out on eBay.
I can build a crate to ship it completely assembled unless you are a confident hobbyist and I can ship it in its cases with the motors disconnected and arms removed. Buyer pays shipping charges.
Photos Here
Here are the particulars:
- 6 Rotor Carbon Fiber Frame
- Zero UAV YS-X6 Flight controller with GPS and WiFi module
**This will require a PC computer and/or Android based tab or phone for tuning, telemetry, and use of the autopilot**
- Spektrum DX8 with AR8000 RX and TM1000 Telemetry Module
- Cinestar 3 Axis gimbal with landing gear
- Photohigher Skyline RSGS Gimbal Gyro
- 6 x Tiger T Motor 2814-10 770kv Motors
- 8 x AKE High Speed PWM 40amp ESC (2 spare)
- 6 x like new APC Slow Fly 14x4.7 Props
- FPV Fever 5.8GHZ 500mW SD video transmitter and receiver
- HDMI to SD Video lightweight Down-converter
- 4 x Venom Power 5000mAh 4S 35C Hard Case LiPo Batts
- 3 x Venom Power 5000mAh 4S 35C standard LiPo Batts
- 3 x Zippy Flight Max 2000mAh 45C LiPo Batts
Also Included:
- Turnigy Max 200w single LiPo Balancer/Charger
- 6 x APC Slow Fly 14x4.7 props for testing and practice (These are pictured with some minor scratches and chips)
- 3 x Brand New APC Slow Fly 14x4.7SF back up props
- 4 x Brand New APC Slow Fly 14x4.7SFP back up props
- NetGear WiFi Router
- Pelican 1650 travel case for Airframe (Requires motors to be disconnected and arms removed)
- Pelican 1650 travel case for TX/RX, batts, and AKS
I'm asking $5000 which I feel is a steal for everything included! I would love to see it go to happy home and not have to part it out on eBay.
I can build a crate to ship it completely assembled unless you are a confident hobbyist and I can ship it in its cases with the motors disconnected and arms removed. Buyer pays shipping charges.
Photos Here
Here are the particulars:
- 6 Rotor Carbon Fiber Frame
- Zero UAV YS-X6 Flight controller with GPS and WiFi module
**This will require a PC computer and/or Android based tab or phone for tuning, telemetry, and use of the autopilot**
- Spektrum DX8 with AR8000 RX and TM1000 Telemetry Module
- Cinestar 3 Axis gimbal with landing gear
- Photohigher Skyline RSGS Gimbal Gyro
- 6 x Tiger T Motor 2814-10 770kv Motors
- 8 x AKE High Speed PWM 40amp ESC (2 spare)
- 6 x like new APC Slow Fly 14x4.7 Props
- FPV Fever 5.8GHZ 500mW SD video transmitter and receiver
- HDMI to SD Video lightweight Down-converter
- 4 x Venom Power 5000mAh 4S 35C Hard Case LiPo Batts
- 3 x Venom Power 5000mAh 4S 35C standard LiPo Batts
- 3 x Zippy Flight Max 2000mAh 45C LiPo Batts
Also Included:
- Turnigy Max 200w single LiPo Balancer/Charger
- 6 x APC Slow Fly 14x4.7 props for testing and practice (These are pictured with some minor scratches and chips)
- 3 x Brand New APC Slow Fly 14x4.7SF back up props
- 4 x Brand New APC Slow Fly 14x4.7SFP back up props
- NetGear WiFi Router
- Pelican 1650 travel case for Airframe (Requires motors to be disconnected and arms removed)
- Pelican 1650 travel case for TX/RX, batts, and AKS