Cinestar 8 for sale
We are selling a new Cinestar 8 from Quadrocopter just recently built and tuned in. The copter is equipped with a HoverFly Pro flight controller + GPS, (& spare DJI Wookong M and spare MK Flight Controller 2.1 + Distro Board + i2C converter), FreeFly Motor Control Set, 8 QC-3328 Motors and 8 APC Slofly 14x5.5 props. It also comes with the Quadrocopter 360 Gimbal with 3 radian gyros to stabilize the camera inflight. The gimbal has the longer tubes to fit larger cams like the FS100. The video down-link is a 500w 5.8 GHz Iftron Mondo Stinger Video transmitter and Iftron Passport Receiver. The copter comes with 4 Quadro Power 8000 mAh 4s batteries, 3 Quadro Power 1200 mAh 3s batteries, and 1 Quadro Power 6000 mAh 5s battery. This also includes the Racers Edge 400w Dual Charger with power supply. This copter is capable of carrying cameras like the Canon 60D, 7D, 5D Mk3, and FS100 but can be easy upgraded to carry larger cameras like the FS700, C300, and Red Epic with proper parts.
The Wookong M is extremely stable inflight with GPS and works amazingly in altitude hold. (Note: the GPS/compass on the Wookong M needs to be replaced, about $250 to replace). The HoverFly Pro + GPS is in perfect condition and has about 35 flights on it.
For any questions please contact me, I would be happy to answer them.
Currently we have it setup in an X8 config...fly's much better for us this way but we have all the other booms if you do not like the X8 config. Sorry, the only picture I have to upload are when it was in the flat 8, will work on getting new ones
We are asking $7,000 OBO for starting price for the entire package ready to be flown.
We are will to think about parting out the copter but would prefer to sell it as a RTF. We are extremely flexible and willing to help you out if you have a special request or questions.
Thanks,
Rob
Specs:
Cinestar 8 Frame
8 QC-3328 Motors
8 APC Slofly 14x5.5 props
Freefly Motor Control Set
8 extra Turnigy Plush 40a ESC's (flashed)
HoverFly Pro + GPS Black Board
DJI Wookong M
MK Flight Controller 2.1 + Distro Board + i2C converter
4 Quadro Power 8000 mAh 4s batteries
3 Quadro Power 1200 mAh 3s batteries
1 Quadro Power 6000 mAh 5s battery
1 Racers Edge Battery Charger (400w dual charger, with power supply)
Quadrocopter 360 Gimbal
3 Radian Gyros
1 Iftron 500w 5.8 GHz Mondo Sting Video Transmitter
1 Iftron Passport Receiver
2 RC controllers DX8 and DX6
We are selling a new Cinestar 8 from Quadrocopter just recently built and tuned in. The copter is equipped with a HoverFly Pro flight controller + GPS, (& spare DJI Wookong M and spare MK Flight Controller 2.1 + Distro Board + i2C converter), FreeFly Motor Control Set, 8 QC-3328 Motors and 8 APC Slofly 14x5.5 props. It also comes with the Quadrocopter 360 Gimbal with 3 radian gyros to stabilize the camera inflight. The gimbal has the longer tubes to fit larger cams like the FS100. The video down-link is a 500w 5.8 GHz Iftron Mondo Stinger Video transmitter and Iftron Passport Receiver. The copter comes with 4 Quadro Power 8000 mAh 4s batteries, 3 Quadro Power 1200 mAh 3s batteries, and 1 Quadro Power 6000 mAh 5s battery. This also includes the Racers Edge 400w Dual Charger with power supply. This copter is capable of carrying cameras like the Canon 60D, 7D, 5D Mk3, and FS100 but can be easy upgraded to carry larger cameras like the FS700, C300, and Red Epic with proper parts.
The Wookong M is extremely stable inflight with GPS and works amazingly in altitude hold. (Note: the GPS/compass on the Wookong M needs to be replaced, about $250 to replace). The HoverFly Pro + GPS is in perfect condition and has about 35 flights on it.
For any questions please contact me, I would be happy to answer them.
Currently we have it setup in an X8 config...fly's much better for us this way but we have all the other booms if you do not like the X8 config. Sorry, the only picture I have to upload are when it was in the flat 8, will work on getting new ones
We are asking $7,000 OBO for starting price for the entire package ready to be flown.
We are will to think about parting out the copter but would prefer to sell it as a RTF. We are extremely flexible and willing to help you out if you have a special request or questions.
Thanks,
Rob
Specs:
Cinestar 8 Frame
8 QC-3328 Motors
8 APC Slofly 14x5.5 props
Freefly Motor Control Set
8 extra Turnigy Plush 40a ESC's (flashed)
HoverFly Pro + GPS Black Board
DJI Wookong M
MK Flight Controller 2.1 + Distro Board + i2C converter
4 Quadro Power 8000 mAh 4s batteries
3 Quadro Power 1200 mAh 3s batteries
1 Quadro Power 6000 mAh 5s battery
1 Racers Edge Battery Charger (400w dual charger, with power supply)
Quadrocopter 360 Gimbal
3 Radian Gyros
1 Iftron 500w 5.8 GHz Mondo Sting Video Transmitter
1 Iftron Passport Receiver
2 RC controllers DX8 and DX6
