Cinestar 8 Complete Package For Sale

gregc

Member
Cinestar 8 complete with Cinestar 3 axis Radian Stabalisation and Iftron FPV setup

Note all prices listed are retail for comparison only.

Cinestar 8 with extended landing gear 1800 usd
DJI Wookong M flight controller 900 usd
DJI LED Bluetooth indicator 100 usd
Phoenix ice lite 50 ESC 99 each total 800 usd
Quadcopter 1-8 ESC power distribution 30 usd
MK 3638 x 8 plus 1 spare 99 each 900 usd
Cinestar 3 axis gimball 1500 usd
3 x radian stabalisers 1050 usd
aerobot 13x6.5 carbon props full set 250 usd
aerobot 13x6.5 x 2 spares 60 usd
Graupner mx20 radio with standard battery 600 usd
Graupner Tx battery LIPO 3.7 v 6000mah 40 usd
Graupner GR 24 receiver for copter 100 usd
Graupner GR 16 receiver for gimbal 86 usd
6 x Hyperion G3 Cx 4s 5000 mAh Lipos 89 each 500 usd
1 x 5000mAH 3s for receiver station 30 usd
1 x 1200mAh 3s for 3 axis gimbal and receiver 20 usd
Castle BEC for Gimball Rx and servos 25 usd
Iftron Mondo extreme tx video 5.8 Ghz 429usd
Iftron Yellowjacket Pro Diversity receiver 5.8 Ghz 529 usd
Mondo Stinger 5.8 Ghz 500 Mw tx video 250 usd
Vonista 7 inch monitor (no bluescreen) 150 usd
5.8 Ghz Bluebeam omni directional TX/RX Vid antennas 60 usd
Iftron Vitenna directional 5.8 Ghz Antenna x 2 74 usd each 150 usd
Sony LANC control 100 usd
Canon 5D Mk2 shutter controller. 30 usd
DJI iOSD Mk 2 255 usd
DJI iOSD Mk1 (updated to Mk2 to use sony CX760)
Lipo checker/alarm x 2
Pelican Case 1620 with Custom Foam and Lid organizer. 250 usd

Background
This rig has only been flown around 10 times and is in excellent condition. It has red LED’s on the front boom and 2 x Blue LED’s on the back booms.

The only flaw anywhere is the GPS antenna has been shortened by 40 mm and re glued due to a knock.

The lipos are from a previous rig and have done approx 30 flights each total. Flight time approx 9 min with Sony CX760. They all still balance perfectly. The Lipos have always been stored correctly and were recently cycled with no problems.

The unit and all equipment pack down into a 1620 Pelican case with a lid organizer for spares and tools etc. It will be shipped in this case.

Also included is all equipment needed for updating the firmware on the Graupner radio gear and the Radian stabalisers.

All gear on the rig is still current and available in the various Multirotor stores.

The only things needed for flying is a lipo charger and FPV Tx frame. The FPV transmitter mount as seen in the photos is not included.

Reason for sale

My transient employment and residence does not allow me to set it up enough for regular use and it has mostly lived in its case for the last 18 months. Therefore unfortunately it is time to part with the rig.

Shipping
I am currently in Finland and will include shipping to Europe.
The Cinestar 3[SUP]rd[/SUP] axis kit with Radian has never been used and will ship separately from Australia.

Price
The total retail value is over 10,500 usd.

Asking Price including shipping to the UK and Europe. Will negotiate shipping outside of Europe.
Thanks for looking.

7000 usd ( 4150 GBP)

 

Attachments

  • DSC01859_2.jpg
    DSC01859_2.jpg
    95.2 KB · Views: 453
  • DSC01860_2.jpg
    DSC01860_2.jpg
    80.4 KB · Views: 392
  • DSC01862_2.jpg
    DSC01862_2.jpg
    88.8 KB · Views: 282
  • IMG_4578_2.jpg
    IMG_4578_2.jpg
    79.7 KB · Views: 304
  • IMG_4585_2.jpg
    IMG_4585_2.jpg
    132.8 KB · Views: 288
  • IMG_4589_2.jpg
    IMG_4589_2.jpg
    126.9 KB · Views: 363
  • IMG_4595_2.jpeg
    IMG_4595_2.jpeg
    184.5 KB · Views: 355
  • IMG_4603_2.jpg
    IMG_4603_2.jpg
    79.2 KB · Views: 356
  • IMG_4606_2.jpg
    IMG_4606_2.jpg
    93.2 KB · Views: 337
  • IMG_4561_2.jpg
    IMG_4561_2.jpg
    100.7 KB · Views: 432

gregc

Member
Hi Folks
I am moving house, country and living on a boat again soon. It will either sell very soon for this new price or be shipped back home to Australia and sit in a cupboard. A heartbreaker but thats how it is.
Therefore a big reduction in price for a quick sale.

5000 usd (3000 GBP)

Thanks Greg
 


JordAmy

New Member
Hi Greg, Looking to step up in this market. What else do I need to get airborne? Does it have RTB capabilities and Home Lock where you are always controlling from behind?
I am in Australia.
 

gregc

Member
Hi Greg, Looking to step up in this market. What else do I need to get airborne? Does it have RTB capabilities and Home Lock where you are always controlling from behind?
I am in Australia.
Hi there,

It has return to home which is what I think you mean by RTB. Flick one switch and it will go to a preset altitude and return to where it started the motors. Mid flight you can also change the return to point but I have not played with this.

To get airborne you would need a Lipo (battery) charger and a frame for supporting the screen on the controller.

Thanks Greg
 



Top