Greg
Member
I already have 1344 Beechwood props.My AUW is 2172(680 alien)I have tried Ecalc but not really sure how accurate.I bought and tried MT2814 770KV Tigers but are not effecient and too much thrust and use almost double amp then these pancake style motors.It would really help me if someone can take a quick look at these motor specs and tell me what would be best.I have been researching for a couple weeks but dont want to buy then have to buy again.Here is the 2 motors I have in mind.Thanks for the assistance.I use 4S 5000 35C
http://www.himodel.com/electric/SUN...Brushless_Motor_for_Multi-rotor_Aircraft.html
http://www.himodel.com/electric/SUN...Brushless_Motor_for_Multi-rotor_Aircraft.html
Also whats would be better.V series or XS.Couldint find a definitive answear as to which would be better.
(Solved)Decided on the 600KV.This will hover @55/60% with my 1344 and my AUW.I can always go to 14''props later if need be.I will see once I try a real flight test.600 kv will be more effecient with 13/14'' then higher kv and smaller props.
http://www.himodel.com/electric/SUN...Brushless_Motor_for_Multi-rotor_Aircraft.html
http://www.himodel.com/electric/SUN...Brushless_Motor_for_Multi-rotor_Aircraft.html
Also whats would be better.V series or XS.Couldint find a definitive answear as to which would be better.
(Solved)Decided on the 600KV.This will hover @55/60% with my 1344 and my AUW.I can always go to 14''props later if need be.I will see once I try a real flight test.600 kv will be more effecient with 13/14'' then higher kv and smaller props.
Last edited by a moderator: