Can someone please recommend some parts for my drone?

[Zivicium]

I want to build a micro class racing FPV quadcopter, i have some parts already selected but need some help on the other parts.

Parts needed:

Flight Controller
Battery Pack
FPV Goggles and Transmitter

Other parts:

Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2):
http://www.hobbyking.com/hobbyking/...HDS_Transmitter_and_6CH_Receiver_Mode_2_.html

Diatone Tyrant 150 Frame Kit - Orange:
http://www.hobbyking.com/hobbyking/store/__98594__Diatone_Tyrant_150_Frame_Kit_Orange.html

DYS 1306-2300KV BX Series Set of Two CW/CCW Motors:
http://www.hobbyking.com/hobbyking/...300KV_BX_Series_Set_of_Two_CW_CCW_Motors.html

Diatone 600TVL 120deg Miniature Camera (Orange):
http://www.hobbyking.com/hobbyking/...e_600TVL_120deg_Miniature_Camera_Orange_.html

TURNIGY Plush 10amp Speed Controller w/BEC

http://www.hobbyking.com/hobbyking/store/__4204__TURNIGY_Plush_10amp_Speed_Controller_w_BEC.html

 

[bob195558]

You may want to purchase the Turnigy 9XR-Pro and to go with it the FrSky XJT transmiter module.
This radio has a lot more capability then the one you are looking at.
(http://www.hobbyking.com/hobbyking/...Radio_Transmitter_Mode_2_without_module_.html) and (https://alofthobbies.com/frsky-xjt-jr-graupner-type-16ch-duplex-transmitter-telemetry-module.html).
Though, a much better radio is the Taranis Plus which comes with the XJT built in (https://alofthobbies.com/frsky-taranis-plus-transmitter-with-travel-case.html).
For receiver you may want the (https://alofthobbies.com/frsky-x4r-sb-3-16-channel-receiver-with-sbus-and-cppm.html) or (https://alofthobbies.com/frsky-xsr-2-4ghz-16ch-receiver.html).

Bob B.